STORE
GripSport Van Rack - 2 Bike
GripSport Van Rack - 2 Bike - Image 2
GripSport Van Rack - 2 Bike - Image 3
GripSport Van Rack - 2 Bike - Image 4
GripSport Van Rack - 2 Bike - Image 5
GripSport Van Rack - 2 Bike - Image 6
GripSport Van Rack - 2 Bike - Image 7
GripSport Van Rack - 2 Bike - Image 8
GripSport Van Rack - 2 Bike - Image 9
GripSport Van Rack - 2 Bike - Image 10
GripSport Van Rack - 2 Bike - Image 11
GripSport Van Rack - 2 Bike - Image 12
GripSport Van Rack - 2 Bike - Image 13

GripSport Van Rack – 2 Bike

$740.00

Gripsport Van-Racks are built tough and can fit almost every caravan or camper-trailer, and its innovative design allows you to quickly and easily swap it over to your vehicle tow bar.

They are the perfect van-rack carrier system that can be mounted to either a caravan or camper-trailer A-Frame or rear bumper. The optional Gripsport Tilting Mechanism provides instant access to your belongings stored behind your bikes without having to remove the rack. Our Bush Chook Mid-Post Tilting Mechanism is a new product that is compatible with Gripsport’s full range of van racks. This is a game changer for many RVer’s travelling with bikes who own Jayco Expanda type vans, caravans with Large Opening Front Boots, caravan with short drawbars requiring  Front Window Access and Forward Fold Camper Trailers.

Please Note: For all of the relevant info about van racks and to fully understand the correct procedure how to fit Gripsport van racks please check our GripSport Van Rack info and fitting guide. Also check our FAQ guide at the bottom of this page for even more information.

Select free assembly and fitting for more information on our free fitting service for Perth Metro customers for van racks – conditions apply (fabrication not included). Don’t pay $400-$500 to get your rack fitted.

5 in stock

Wheel Setup Options

Choose the wheel setup for your requirements. Deselect checkbox if mixing up wheel setups in other wheel setup options. Scroll over product for more info

Gripsport's standard wheel setup has a front wheel hoop and a rear wheel "V" shaped taco (includes velcro cinch strap). This setup allows you to fit different wheelbase bikes on the rack without the need to adjust the wheel spacings.
The all hoop setup is terrific if you don't need to swap bikes around. The wheels sit lower in the hoops than the rear taco, making the bikes more secure. the Velcro cinch strap is not required with this setup although we still recommend adding cinch straps to your kit.
The fat bike setup requires the hoops to be set at the correct wheelbase for each bike, if a different sized bike is used the wheel spacings will need to be adjusted. The fat bike hoops suit tyres up the 6" wide and set to the wheelbases of the bikes

Choose Other Wheel Setup Options

Got a fatty and a normal bike? Enter the quantity for other wheel setup options below.

Tilting or Non-Tilting

The optional Gripsport tilting feature gives you instant access to anything behind or under your bikes such as front boots, windows and toolboxes. Scroll over product for more info

The optional Gripsport tilting feature gives you instant access to anything behind or under your bikes such as front boots, windows and toolboxes.
A simple bracket that converts the vertical 50mm post to the horizontal 40mm rack arm required to hold the rack. This is also recommended if selecting our new mid-post tilting mechanism.
For Expanda type van owners, our new mid-post tilting mechanism means that bikes and the rack no longer need to be removed in order to extend the front bed. For owners with a large hinged front opening boot, like some of the Jayco Stirling/Silverline models and some Euro brands, previously there was no way to access the boot without removing the post, this is now as simple as removing the locating pin and tilting the post. Note: Posts will have to fabricated to suit this mechanism if not purchasing our post kit.

Bolt on Mount (Optional)

Compatible with Van-Rack models for installation on caravan/camper/trailer A frames Each kit includes: 1 x vertical post – 1 x Bolt-On Mount – 2 x Saddles (including bolts) Scroll over product for more info

The tall post is height adjustable from 574mm to 844mm from the top of the drawbar. These are used to help clear items on your drawbar like gas bottles, toolboxes etc.
The short post is height adjustable from 269mm to 449mm from the top of the drawbar. These are handy if extra height is not required on the drawbar and also suitable for rear rack mounting.
The short post is height adjustable from 269mm to 449mm from the top of the drawbar. The quick release posts are used when clearance is required from extending beds (like Jayco Expanda's) or other items that extend forwards. It allows quick and easy removal of the racks if required.
The tall quick release post is height adjustable from 574mm to 844mm from the top of the drawbar. The quick release posts are used when clearance is required from extending beds or other items that extend forwards. It allows quick and easy removal of the racks if required.

Vehicle Towbar Adapter

Swap your van rack to your vehicle easily. Scroll over product for more info

The Tilting Adapter provides rear access to your boot/hatch/barn doors/spare wheel etc without having to remove the rack or bikes.
The Van-Rack Towbar Adapter allows you to swap your Van-Rack from caravan to car quickly and easily.
The Van-Rack tongue towbar adapter allows you to swap your Van-Rack from caravan to car. This requires installation under your towball.
Got 37” spares hanging off the back of your 4x4? This beast will clear the big dogs and is also useful for utes with underslung towbars. The Tilting Adapter provides rear access to your boot/hatch/barn doors/spare wheel etc without having to remove the rack or bikes.

Towbar Adapter Accessories

Make your rack safe, secure and legal with these towbar accessories. Scroll over product for more info

Most vehicle hitch receivers have a small amount of clearance between the receiver and the 2" towbar tongue or towbar adapter. This play is accentuated when a rack is installed and you have over a metre hanging out each side, the wobble is quite significant. The Gripsport rack hitch stabiliser eliminates any movement and also has an option to add a lock for security. The Bike Rack Hitch Stabiliser is a high quality anti-rattle device suitable for any bike rack that mounts directly into a 50mm (2″) square hitch tow bar receiver. It’s steel construction, CNC machined and zinc plated materials ensure it is strong and built to last! The stabiliser is also 100% lockable keeping it secure. Please note: This device must only be used to stabilise bike racks and must NOT be used for towing or recovery purposes.
The Ultimate Anti-Rattle Solution for Your Bike Rack Hitch. Say goodbye to annoying rattling and movement with GripSport’s Hitch Clamp, designed to fit all 50mm Hitch-mounted bike racks, including the GS-Adventure and GS-Urban series. (Please note: This Hitch Clamp comes included with the Versa Vertical bike rack.) Further reduction of any movement in the square hitch can be achieved when used in conjuction with GripSport’s bike rack hitch stabiliser. Installing the Hitch Clamp: Slide the clamp over the top/bottom of the protruding hitch arm, making sure to catch the bottom edge of the tow bar hitch with the lower plate. The upper plate only rests on top of the bike rack hitch arm. Tighten the large nuts underneath using a spanner or socket until secure, pulling the rack downwards and tightening the nuts. Screw on the thin locking nuts and nip up to avoid large nuts loosening with spanner or socket.
Enhance your GripSport Bike Rack with Gripsport's integrated bike rack light and number plate assembly. Your kit is compatible with both Standard Vehicle Number Plates and smaller Auxiliary/Bike Rack Plates. Regardless of where you drive in Australia, the rules are simple: You must not obstruct clear view of your vehicle lights You must not obstruct clear view of your number plate And if you drive at night, your number plate must be illuminated.

Van Rack Accessories

Fit kids bikes, step through bikes and secure bikes with these handy accessories. Scroll over product for more info and select number for multiple buys.

This product is designed for bikes with smaller diameter wheels that are prone to sitting too low in the wheel hoop. The standard wheel hoop reducers are the same concept as the original, but with a recent facelift and the addition of reusable zip ties, allowing the zip ties to stay with the hoop reducer the whole time meaning it’s always ready to go and with less chance of losing parts. You can add or remove the hoop reducers in seconds, allowing any configuration of bike fitting on the fly time and time again, and the re-usable zip ties eliminate the need for single-use plastics. Please note: This product is sold as a pair.
The Fat Tyre Hoop Reducers or ‘Fat Hoop Reducers’ is the same idea and concept as the originals, but is for those Fat Tyre Bikes with smaller diameter wheels that end up sitting too low in the Fat Hoop. The Fat Hoop Reducer. Please note: This product is sold as a pair.
The GripSport Top Tube Adapter allows you to securely fit the Frame Hook and Quick Release Carrier Strap onto any “step-through” bike or any bike with a very low top tube, including some ladies bikes and/or modern e-bikes.
If you purchase an all hoop setup, cinch straps are not included (only supplied with rear taco). Add these to your kit for piece of mind. Extreme, heavy-duty, quick-release (velcro style). Key Features: For secure, heavy-duty use. 500mm long Holds diameters from 40-120mm. Hook and loop fastener stitched to heavy-duty webbing. Steel buckle (not cheap plastic)

Mid - Post Tilting Mechanism Post Kit (Not for standard applications)

This new setup requires two separate posts, upper and lower. These can be made DIY or we can supply you our pre-drilled, ready to install post kits. Scroll over product for more info.

The lower post is 480mm in length and drilled at 90mm centres its entire length, this suits the GripSport bolt on mount and the lower side of the mid-post tilting mechanism. The post can be cut to length to suit whatever clearance the rack needs when tilted. The shortest this post can be cut to is 300mm.
The upper post is 330mm in length and drilled at 50mm centres its entire length, this suits both the GripSport tilting or fixed mechanism and the upper side of the mid-post tilting mechanism. The post can be cut to length to suit whatever clearance the rack needs when tilted. The shortest this post can be cut to is 230mm.
Our new universal post kits contain two separate posts. The lower post is 480mm in length and drilled at 90mm centres. The upper post is 330mm in length and drilled at 50mm centres.
Product price: $740.00
Order total:
Categories: , Tags: , , , , ,

Gripsport van-racks can accommodate road, MTB, family and kids’ bikes, e-bikes, and fat tyre bikes.

This rack can transport 2 bikes, weighing up to 30kg each. Designed for Light Off-Road Use to Medium Off Road Use only (refer to Terrain Guide).

All Gripsport racks are designed, tested, and manufactured right here in Australia and come with a structural warranty. They are built tough and to keep them looking and performing at their best we recommend following Gripsports product care & use guidelines.

Specification
Bike Model Van-Rack
Bike Capacity 2 Bikes
Weight Capacity 30kgs Per Bike (60kgs Total)
Carrier Weight 16kgs (+13kgs with Bolt-on Mount)
Bike Type MTB, Road, Fat, E-Bike
Bolt-on Mount Optional – View Gripsport Fitting Guide
Fast Loading
Tilting Function Optional, either Gripsport top-post tilting mechanism or Bush Chook mid-post tilting mechanism
Off-Road Capable
Light Assembly Optional (for use when fitted to vehicle)
Construction Material Steel
Structural Guarantee 5 Years – View Warranty
1  > 2, 3 or 4 Bike Conversion
Vehicle Conversion

new mid-post tilting mechanism

We are proud to announce we have just released a new mid-post tilting mechanism (left). This is a game changer for owners of Expanda type vans, forward fold campers, and vans with large hinged front opening boots. There is no need to remove the rack or bikes in order to extend beds or gain access to storage boots. This is compatible for Gripsport’s complete van rack range.

FAQ’s

select the following links for  all the detailed information required to select and fit a gripsport rack to your van

Fitting Gripsport Bike Racks to Caravans Brief Description

Fitting Gripsport Bike Racks to Caravans Full Description

Fitting a Gripsport Van Rack to a Jayco Expanda type van

Fitting a Gripsport van rack to the back of a vehicle

Choosing The Correct Post Size

Custom mounting van racks

What will it cost to fit a Gripsport Van Rack?

Will a Gripsport Van Rack affect my tow ball weight?

Fitting Gripsport Van Racks to the back of caravans?

Fitting a Gripsport Van Rack to vans with large front boots like a Jayco Silverline

Fitting a Gripsport Van Rack to vans with short drawbars requiring front window access

Assembly instructions Gripsport Van Rack

Terrain Usage Guide

Product Warranty

"*" indicates required fields

Your Name*
This field is for validation purposes and should be left unchanged.

You may also like…

Related products

Back To Top