Bush Chook Van Rack Mid-Post Tilting Mechanism Post Kit

Post kit for expanda type vans, forward fold campers and vans with large front opening boots

We’re excited to announce the release of our new Mid-Post Tilting Mechanism. This is a game changer for many RVer’s travelling with bikes who own Jayco Expanda type van, caravans with large front opening boots and forward fold camper trailers. This exciting new product is proudly made right here in WA. Our new post kit is pre-drilled and cut to length, ready to install.

This new setup requires two separate posts, upper and lower. The posts can be made DIY or we can supply you our pre-drilled, ready to install post kits. Our posts are 50x50x4mm Duragal and are cut and drilled specifically to suit the Gripsport bolt on mount and tilt/non-tilt mechanism.
Our posts are also available to purchase singularly. This is handy if you currently have a short post and would like to use it for the bottom section and purchase the top section which is drilled to suit the standard Gripsport rack tilting/non-tilting assembly at 50mm centres. It can be easily trimmed to suit different setups. View Fitting Guide

upper post

The upper post is 330mm in length and drilled at 50mm centres its entire length, this suits both the GripSport tilting or fixed mechanism and the upper side of the mid-post tilting mechanism. The post can be cut to length to suit whatever clearance the rack needs when tilted. The shortest this post can be cut to is 230mm.

lower post

The lower post is 480mm in length and drilled at 90mm centres its entire length, this suits the GripSport bolt on mount and the lower side of the mid-post tilting mechanism. The post can be cut to length to suit whatever clearance the rack needs when tilted. The shortest this post can be cut to is 300mm.