STORE
GripSport Adventure Bike Rack - 2 Bike
GripSport Adventure Bike Rack - 2 Bike - Image 2
GripSport Adventure Bike Rack - 2 Bike - Image 3
GripSport Adventure Bike Rack - 2 Bike - Image 4
GripSport Adventure Bike Rack - 2 Bike - Image 5
GripSport Adventure Bike Rack - 2 Bike - Image 6
GripSport Adventure Bike Rack - 2 Bike - Image 7
GripSport Adventure Bike Rack - 2 Bike - Image 8
GripSport Adventure Bike Rack - 2 Bike - Image 9
GripSport Adventure Bike Rack - 2 Bike - Image 10
GripSport Adventure Bike Rack - 2 Bike - Image 11
GripSport Adventure Bike Rack - 2 Bike - Image 12
GripSport Adventure Bike Rack - 2 Bike - Image 13

GripSport Adventure Bike Rack – 2 Bike

$915.00

The GS-Adventure 2-bike tow bar bike racks are easy to use and built tough for offroad adventures or everyday use driving around town.

They are the perfect all-round tow bar bike rack made for cars, SUVs and 4WDs and can accommodate road, MTB, family and kids’ bikes, e-bikes and fat tyre bikes.

Its clever tilting function provides you with convenient access to your boot as well as side-opening and upward swinging rear doors found on SUVs and 4WDs… all without having to remove your bikes. A real time saver! Check out the GSA assembly and fitting guide.

All GripSport racks are designed, tested, and manufactured right here in Australia and come with a structural warranty. Gripsport racks are built tough, and to keep them looking and performing at their best we recommend following Gripsport’s product care & use  guidelines.

This rack can carry 2 bikes, weighing up to 30kg each. Designed for Light Off-Road Use to Medium Off Road Use only (refer to Terrain Guide).

4 in stock

Wheel Setup Options

Choose the wheel setup for your requirements. Deselect checkbox if mixing up wheel setups in other wheel setup options. Scroll over product for more info

Gripsport's standard wheel setup has a front wheel hoop and a rear wheel "V" shaped taco (includes velcro cinch strap). This setup allows you to fit different wheelbase bikes on the rack without the need to adjust the wheel spacings.
The all hoop setup is terrific if you don't need to swap bikes around. The wheels sit lower in the hoops than the rear taco, making the bikes more secure. the Velcro cinch strap is not required with this setup although we still recommend adding cinch straps to your kit.
The fat bike setup requires the hoops to be set at the correct wheelbase for each bike, if a different sized bike is used the wheel spacings will need to be adjusted. The fat bike hoops suit tyres up the 6" wide and set to the wheelbases of the bikes

Choose Other Wheel Setup Options

Got a fatty and a normal bike? Enter the quantity for other wheel setup options below.

Hitch Options

Choose the hitch setup for your requirements. Scroll over product for more info

Fits to a standard 2" square hitch receiver. The Tilting Adapter provides rear access to your boot/hatch/barn doors/spare wheel etc without having to remove the rack or bikes.
Fits to a standard 2" square hitch receiver. Got 37” spares hanging off the back of your 4x4? This beast will clear the big dogs and is also useful for utes with underslung towbars. The Tilting Adapter provides rear access to your boot/hatch/barn doors/spare wheel etc without having to remove the rack or bikes.
The Van-Rack tongue towbar adapter allows you to swap your Van-Rack from caravan to car. This requires installation under your towball.

Hitch Stabilisers

Anti-rattle devices for your adapter Scroll over product for more info

Stupidly simple to fit and easily swapped between different racks and different towbars as needed. This high quality anti-rattle device stabilises any make or model bike rack that slips straight into a 50mm (2 inch) square hitch receiver. In typical GripSport fashion it's tough, user friendly and can even be fitted with a padlock (not included) to help lock that valuable rack to your vehicle.
The Ultimate Anti-Rattle Solution for Your Bike Rack Hitch. Say goodbye to annoying rattling and movement with GripSport’s Hitch Clamp, designed to fit all 50mm Hitch-mounted bike racks, including the GS-Adventure and GS-Urban series. (Please note: This Hitch Clamp comes included with the Versa Vertical bike rack.) Further reduction of any movement in the square hitch can be achieved when used in conjuction with GripSport’s bike rack hitch stabiliser.

Adventure Rack Accessories

Fit small kids bikes, step through bikes and secure your bikes with these accessories. Scroll over product for more info and select number for multiple buys.

This product is designed for bikes with smaller diameter wheels that are prone to sitting too low in the wheel hoop. The standard wheel hoop reducers are the same concept as the original, but with a recent facelift and the addition of reusable zip ties, allowing the zip ties to stay with the hoop reducer the whole time meaning it’s always ready to go and with less chance of losing parts. You can add or remove the hoop reducers in seconds, allowing any configuration of bike fitting on the fly time and time again, and the re-usable zip ties eliminate the need for single-use plastics. Please note: This product is sold as a pair.
The Fat Tyre Hoop Reducers or ‘Fat Hoop Reducers’ is the same idea and concept as the originals, but is for those Fat Tyre Bikes with smaller diameter wheels that end up sitting too low in the Fat Hoop. The Fat Hoop Reducer. Please note: This product is sold as a pair.
The GripSport Top Tube Adapter allows you to securely fit the Frame Hook and Quick Release Carrier Strap onto any “step-through” bike or any bike with a very low top tube, including some ladies bikes and/or modern e-bikes.
If you purchase an all hoop setup, cinch straps are not included (only supplied with rear taco). Add these to your kit for piece of mind. Extreme, heavy-duty, quick-release (velcro style). Key Features: For secure, heavy-duty use. 500mm long Holds diameters from 40-120mm. Hook and loop fastener stitched to heavy-duty webbing. Steel buckle (not cheap plastic)
Product price: $915.00
Order total:
Categories: , Tags: , , ,
Specification
Bike Model GSA
Bike Capacity 2 Bikes
Weight Capacity 30kgs Per Bike (60kgs Total)
Carrier Weight 23kgs
Bike Type MTB, Road, Fat, E-Bike, Tandem
Bike Wheelbase: Axle to Axle Max 1300mm (approx.). Please contact us for longer options.
Hitch Type Tongue or Square
Fast Loading
Tilting Function
Off-Road Capable
Light Assembly Choose the Adventure + rack for this option
Construction Material Steel
Structural Guarantee 5 Years – View Warranty
2 > 4 Bike Conversion
Caravan Conversion The Gripsport Van Rack Bolt on Mount, Tilt mechanism (or fixed) and Van Rack Arm will have to be purchased to convert this.

 

Vehicle Rack FAQ’s

View the Gripsport How To Videos Here

 

 

Assembly Instructions

Converting GS2 to Caravan

Terrain Usage Guide

Warranty

Frequently asked questions

"*" indicates required fields

Your Name*
This field is for validation purposes and should be left unchanged.

You may also like…

Related products

Back To Top