STORE
Towbar Adapter 1-2 Bike Tilting
Towbar Adapter 1-2 Bike Tilting - Image 2
Towbar Adapter 1-2 Bike Tilting - Image 3
Towbar Adapter 1-2 Bike Tilting - Image 4
Towbar Adapter 1-2 Bike Tilting - Image 5
Towbar Adapter 1-2 Bike Tilting - Image 6

Towbar Adapter 1-2 Bike Tilting

$270.00

The Gripsport Towbar Adapter allows you to swap your Van-Rack from caravan to car quickly and easily, watch the video below for full details.

The Adapter is made from heavy-duty zinc plated steel and is suitable for 2″ (50mm) square hitch receivers (Tongue Mount available in 2-Bike Tilting configuration only).

 

6 in stock

Towbar Adapter Accessories

Make your rack safe, secure and legal with these towbar accessories. Scroll over product for more info

Most vehicle hitch receivers have a small amount of clearance between the receiver and the 2" towbar tongue or towbar adapter. This play is accentuated when a rack is installed and you have over a metre hanging out each side, the wobble is quite significant. The Gripsport rack hitch stabiliser eliminates any movement and also has an option to add a lock for security. The Bike Rack Hitch Stabiliser is a high quality anti-rattle device suitable for any bike rack that mounts directly into a 50mm (2″) square hitch tow bar receiver. It’s steel construction, CNC machined and zinc plated materials ensure it is strong and built to last! The stabiliser is also 100% lockable keeping it secure. Please note: This device must only be used to stabilise bike racks and must NOT be used for towing or recovery purposes.
The Ultimate Anti-Rattle Solution for Your Bike Rack Hitch. Say goodbye to annoying rattling and movement with GripSport’s Hitch Clamp, designed to fit all 50mm Hitch-mounted bike racks, including the GS-Adventure and GS-Urban series. (Please note: This Hitch Clamp comes included with the Versa Vertical bike rack.) Further reduction of any movement in the square hitch can be achieved when used in conjuction with GripSport’s bike rack hitch stabiliser. Installing the Hitch Clamp: Slide the clamp over the top/bottom of the protruding hitch arm, making sure to catch the bottom edge of the tow bar hitch with the lower plate. The upper plate only rests on top of the bike rack hitch arm. Tighten the large nuts underneath using a spanner or socket until secure, pulling the rack downwards and tightening the nuts. Screw on the thin locking nuts and nip up to avoid large nuts loosening with spanner or socket.
Enhance your GripSport Bike Rack with Gripsport's integrated bike rack light and number plate assembly. Your kit is compatible with both Standard Vehicle Number Plates and smaller Auxiliary/Bike Rack Plates. Regardless of where you drive in Australia, the rules are simple: You must not obstruct clear view of your vehicle lights You must not obstruct clear view of your number plate And if you drive at night, your number plate must be illuminated.
Product price: $270.00
Order total:
Categories: , , Tags: , ,

IMPORTANT INFORMATION

  • The Tilting Adapter provides rear access to your boot/hatch/barn doors/spare wheel etc without having to remove the rack or bikes. Please refer to the fitting and clearance guides provided.
  • When fitting to a 50mm Hitch we always suggest using a  Bike Rack Hitch Stabiliser for Anti-Rattle and Anti-Theft. Please consider adding this to your order.
  • When using the Tow Bar Adapter we always suggest using a Rack Light and Number Plate Assembly for compliance with road laws and visibility at night. Please consider adding this to your order.

"*" indicates required fields

Your Name*
This field is for validation purposes and should be left unchanged.

You may also like…

Related products

Back To Top