The Gripsport Bolt On Mount is compatible with Van-Rack models for installation on caravan/camper/trailer A frames
Each kit includes: 1 x vertical post – 1 x Bolt-On Mount – 2 x Saddles (including bolts)
Bolt on mount and van rack assembly (below)
The Gripsport Bolt On Mount is compatible with Van-Rack models for installation on caravan/camper/trailer A frames
Each kit includes: 1 x vertical post – 1 x Bolt-On Mount – 2 x Saddles (including bolts)
TALL POST
The tall post is the most common setup – used on vans and campers where you need to get the bike rack (and bikes) up and over toolboxes, gas bottles and spare wheels etc.
The tall post is height adjustable from 574mm to 844mm from the top of the drawbar. These are used to help clear items on your drawbar like gas bottles, toolboxes etc.
short posts
Short posts are used on vans and campers where height is not an issue.
The short post is height adjustable from 269mm to 449mm from the top of the drawbar. These are handy if extra height is not required on the drawbar and also suitable for rear rack mounting.
quick releASE POSTS
Quick-Release posts are ONLY required for vans and campers with very low pull-out or fold-out beds that setup over the “A” frame (such as Jayco Expanda). For vans like these, both the bikes and rack have to be removed before setting up the bed and these posts have a built-in quick release system allowing bikes and rack to be completely removed (right down to the level of the red arrow) in under 30 seconds. These posts are available in both short and long.
The short quick release post is height adjustable from 269mm to 449mm from the top of the drawbar.
The tall quick release post is height adjustable from 574mm to 844mm from the top of the drawbar.
The quick release posts are used when clearance is required from extending beds (like Jayco Expanda’s) or other items that extend forwards. It allows quick and easy removal of the racks if required.
