Tri-fold Table Doovalackys are flexible cords and have a fair amount of adjustment within them. Here at Bush Chook RV & Leisure we have been testing their limitations and their ideal tension in order to obtain the best results for securing RV internals.
Although we have built in tolerances for incorrect measuring it is best that you follow these simple measuring instructions for the best possible results for your Doovalackys.
It is imperative that you NEVER overstretch your Doovalackys, the Bungee cord joining crimp is metal and although it is wrapped with heat shrink, if the Doovalackys are stretched past their limitations they may fail causing the crimp to separate from the cord. If you or more importantly part of your face is in the rebound path of a failing Bungee cord, it could cause serious eye damage or even blindness.
The above setup is common in moder RV's
The internal configuration in the majority of today’s RV’s is very similar, bed at the front, kitchen/dining in the middle and ensuite at the rear. This setup usually results with the seating area adjacent to the protruding wheel arch. The wheel arch below the bottom of your table leg will be the bottom anchor point for your Tri-fold Table Doovalacky.
Measuring for supply of the correct size Tri-fold Table Doovalacky is easy. If your table setup is similar to the pics below all we require is one measurement in order to ascertain where the anchor points will be fixed.
1) With the tri-fold table closed measure the distance from the bottom of the table leg to the top of the wheel arch. Thiis measurement is fairly similar in most modern RV’s fitted with a Tri-fold table. This is all we require to supply your Tri-fold Table Doovalacky.
Demo measurement 1 is 165mm. (This is the default setting on the order page)
What colour is your veneer? Doovalacky anchors are available in black or white only.
If your veneer is a different colour the anchor can be easily painted to match before installation.
For the above installation the veneer is white, so a white anchor was fitted to the wheel arch and a black anchor was fitted to the table leg. When the leg is out the black anchor will be less visible. When ordering this is the default setting but can be changed to your preference.
We have listed a range of measurements on the order page. If your measured distance differs by more than 20mm from those listed please contact us with your measurements on the contact us page.
As soon as we receive the order we will custom make the Tri-fold Table Doovalacky and post it out to you.We may require photographs if your RV configuration differs from the norm.